CT315
We manufacture a variety of condensate tanks. Many of our tanks are replacing existing leaking units that were designed without corrosion allowance. We begin with a 1/4-inch minimum thickness on all sizes of condensate receiver and often use 3/8-inch thickness. When buying a system with pumps, motors, or gauges, don’t forget that the tank is an integral part of the system. You can protect your system by buying a tank with corrosion allowance from Midwest Tank Co.
| Specifications | |
|---|---|
| Capacity | 315 |
| Length (A) | 6′-0″ |
| Diameter | 3′-0″ |
| Dim. (C) | 2′-8″ |
| Dim. (D) | 2′-0″ |
| Dim. (E) | 8 in |
| Low Pressure Return (F) | 4 in |
| Dim. (G) | 1 1/2 in |
| Dim. (H) | 2 in |
| Hi Pressure Return (I) | 1 1/4 in |
| Dim. (J) | 2 in |
| Tank Heater (K) | 1 1/4 in |